Restoring my system .. worked

Saturday, 2 January 2016

A while back I wrote about some issues with converting a two-disk RAID system to a one-disk system, but just to recap:

  • We knew were were moving to Finland.
  • The shared/main computer we used in the UK was old and slow.
  • A new computer in Finland would be more expensive than it should be.
  • Equally transporting a big computer from the UK would also be silly.

In the end we bought a small form-factor PC, with only a single drive and I moved one of the two drives from the old machine into it. Then converted it to run happily with only a single drive, and not email every day to say "device missing".

So there things stood, we had a desktop with a single drive, and I ensured that I took full daily backup via attic.

Over Chrismas the two-year old drive failed. To the extent I couldn't even get it to be recognized by the BIOS, and thus couldn't pull data off it. Time to test my backups in anger! I bought a new drive, installed a minimal installation of the Jessie release of Debian onto the system, and then ran:

 cd /
 .. restore latest backup ..

Two days later I'd pulled 1.3Tb over the network, and once I fixed up grub, /etc/fstab, and a couple of niggles it all just worked. Rebooted to make sure the temporary.home hostname, etc, was all gone and life was good.

Restored backup! No errors! No data-loss! Perfect!

The backup-script I use every day was very very good at making sure nothing was missed:

attic create --stats --checkpoint-interval=7200 attic@${remote}:/attic/storage::${host}-$(date +%Y-%m-%d-%H)
  --exclude=/proc      \
  --exclude=/sys       \
  --exclude=/run       \
  --exclude=/dev       \
  --exclude=/tmp       \
  --exclude=/var/tmp   \
  --exclude=/var/log   \

In other news I published my module for controlling the new smart lights I've bought

| No comments



Recent Posts

Recent Tags