So I'm gonna start doing arduino-things

Saturday, 31 December 2016

Since I've got a few weeks off I've decided I need to find a project, or two, to occupy me. Happily the baby is settling in well, mostly he sleeps for 4-5 hours, then eats, before the cycle repeats. It could have been so much worse.

My plan is to start exploring Arduino-related projects. It has been years since I touched hardware, with the exception of building a new PC for myself every 12-48 months.

There are a few "starter kits" you can buy, consisting of a board, and some discrete components such as a bunch of buttons, an LCD-output screen, some sensors (pressure, water, tilt), etc.

There are also some nifty little pre-cooked components you can buy such as:

The appeal of the former is that I can get the hang of marrying hardware with software, and the appeal of the latter is that the whole thing is pre-built, so I don't need to worry about anything complex. Looking over similar builds people have made, the process is more akin to building with Lego than real hardware-assembling.

So, for the next few weeks my plan is to :

  • Explore the various sensors, and tutorials, via the starter-kit.
  • Wire the MP3-playback device to a wireless D1-mini-board.
    • Which will allow me to listen to (static) music stored on an SD-card.
    • And sending "next", "previous", "play", "volume-up", etc, via a mobile.

The end result should be that I will be able to listen to music in my living room. Albeit in a constrained fashion (if I want to change the music I'll have to swap out the files on the SD-card). But it's something that's vaguely useful, and something that I think is within my capability, even as a beginner.

I'm actually not sure what else I could usefully do, but I figured I could probably wire up a vibration sensor to another wireless board. The device can sit on the top of my washing machine:

  • If vibration is sensed move into the "washing is on" state.
    • If vibration stops after a few minutes move into the "washing machine done" state.
      • Send a HTTP GET-request, which will trigger an SMS/similar.

There's probably more to it than that, but I expect that a simple vibration sensor will be sufficient to allow me to get an alert of some kind when the washing machine is ready to be emptied - and I don't need to poke inside the guts of the washing machine, nor hang reed-switches off the door, etc.

Anyway the only downside to my plan is that no doubt shipping the toys from AliExpress will take 2-4 weeks. Oops.

| No comments

 

 

Recent Posts

Recent Tags